Loading ...
Loading ...
Loading ...
34
USA
You can put about 4.4 Pounds of
softening salt into the salt reservoir.
5. Replace the lid and tighten it when the
reservoir is full.
You need to add salt right before
starting the machine. Thus, the
overflowing salty water will be
flushed immediately, preventing the
risk of corrosion in machine. In cases
where you would not start washing
immediately, run your machine empty
in the shortest program.
Since different salt brands in the
market have different particle sizes
and since the water hardness may
vary, dissolution of the salt in water
may take a couple of hours. Therefore,
Salt Indicator remains on for a while
after adding salt into the machine.
10. CARE AND
MAINTENANCE
WARNING:
Before cleaning or
carrying out maintenance, switch off
the appliance, disconnect the mains
plug and turn off the water tap.
WARNING:
Do not repair or replace
any part of the dishwasher or attempt
any servicing unless specifically
recommended by this manual. We
recommend that the dishwasher only
be repaired by an authorized service
agent.
CAUTION :
To avoid the possibility
of slipping, keep the floor around the
dishwasher clean and dry. Keep your
appliance free from the accumulation
of combustible materials, such as lint,
rags, and chemicals.If the dishwasher
is not in use for an extended period of
time, we recommend you check that
the baskets are empty, leave the inside
of the dishwasher clean, the door
cracked open to allow air to circulate,
turn off both the power and water
supply to the dishwasher.
10.1 CARING FOR YOUR
DISHWASHER EXTERIOR
CAUTION :
Possible dishwasher
damage: Abrasive cleaners, scouring
pads, abrasive cloths (paper towels)
can damage the dishwasher decorative
door.
Loading ...
Loading ...
Loading ...