Loading ...
Loading ...
Loading ...
27
USA
6.7 CANCELLING THE
PROGRAM
Open the door of the product press and
hold the Program Selection / Program
Cancel keys for 3 seconds. After the 3 -
2 - 1 countdown, 0:01 is displayed, close
the door of the product and wait for the
draining process complete. Draining is
completed in 2 minutes and the machine
gives an audible warning when it is
completed.
There might be residues of detergent
or rinse aid in the machine and/or on
the pieces being washed depending
on the step the program you have
cancelled was in.
6.8 SALT INDICATOR
(Select Models)
Please check the salt indicator on the
display to see whether there is adequate
amount of softening salt in the dishwasher
or not. You need to refill the salt reservoir
with salt whenever salt indicator appears
on the display of your machine.
Adjusting the water hardness level is
explained in Water Softening System
section.
6.9 RINSE AID INDICATOR
Please check the rinse aid indicator on the
display to see whether there is adequate
amount of rinse aid in the dishwasher or
not. You need to refill the rinse aid reservoir
with rinse aid whenever rinse aid indicator
appears on the display of your machine.
Adjustng the amount of rnse ad
1. After switching on your machine, press
the Menu key for 3 second.
6.10 END OF PROGRAM
When the program you have selected
comes to an end, an audible warning
signal will warn you to turn off your
machine. This audible signal will warn
you with certain intervals before it
turns off.
End of Program indicator will light up when
the washing program is over.
1. Open the door of the machine.
2. Press On/Off key to turn off your
machine.
3. Close the tap.
4. Unplug the machine from the socket.
For energy saving, the machine is
automatically turned off following the
completion of the program or if the
program is not started.
2. Using <- and +> keys, proceed to “P:”
on the display.
3. Set to the appropriate level with the
Selection key.
4. Press the Menu key to exit the settings
menu. Your setting will be saved
automatically.
No rinse aid dispensed in P:0 wash position.
1 dose of rinse aid is dispensed in P:1
position.
2 doses of rinse aid are dispensed in P:2
position.
3 doses of rinse aid are dispensed in P:3
position.
4 doses of rinse aid are dispensed in P:4
position.
Loading ...
Loading ...
Loading ...