Loading ...
Loading ...
3
Your TND
™
Tablet Install the Mount
2
Home
Main Menu
Volume
Down UpPower
Dash cam
SD card
Audio out
NOTE: Follow all local regulations governing the placement of the mount.
1. Select an area with a line of sight to the sky and GPS satellites.
2. Clean and dry the mounting area.
3. Remove the suction cup protective fi lm.
4. Attach the two pieces of the mount together.
5. Adjust the angle of the mount.
6. Pull the suction cup lever up to release suction.
7. Plug the power cord into the mount and
the vehicle’s 12-volt power source.
8. Place and hold the mount suction cup
against the mounting surface.
9. Press the suction cup lever down until it snaps into place.
10. Snap the tablet onto the mount.
11. Adjust the tablet so that it can be easily seen and does not
block the driver’s line of sight.
Micro USB
Plug the power cord into the mount and
Place and hold the mount suction cup
Loading ...
Loading ...
Loading ...