Loading ...
Loading ...
Loading ...
66
Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0
Figure 11-15 Sample Automatic Relearn Help Screen
To perform Static Relearn
1. Install the tire pressure sensor correctly.
2. Inflate all the tires to the rated value in the nameplate(usually on the door
or door frame).
3. Turn on the ignition switch (turn to ON/RUN/START).
4. Operate the instrument panel to let the vehicle enter the static relearn
mode(if need) . Usually the horn will beep twice and the left light will be on.
5. Complete the learning process according to the device or multimedia
display screen. If successful, the horn will beep once.
6. Drive the vehicle for at least 15 minutes, to ensure that the tire pressure
system works normally (the tire pressure light is off).
NOTE:
Different models have different static relearn methods. Please read the
relearn procedure carefully before performing the relearn function.
11.4.4 Clone Sensor
Use one of the following method to copy according to the actual situation.
1. Copy by activation
2. Copy by manually input the sensor IDs. (notice the data format is decimal
or hexadecimal)
Loading ...
Loading ...
Loading ...