Loading ...
Loading ...
Loading ...
BEFORECALLINGFORSERVICE
To save you time and money, before making a service call check the list below
for any problem you may feel you have with the performance of your oven. If
the problem is something you cannot fix, use the Consumer Service Numbers
located at the back of this manual. When making any calls, have the
Mode| No., Repair Parts list, Use and Care Manual and the Bate
of Purchase avaiJah|e.
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
The dispJay of your Oven malfunction. Press the CLEAR/OFF
control is flashing pad. Let tile oven cool for
"F" fo|lowed by a 1 hour and enter an oven
number or letter, or cleaning operation. If
(Upper Oven) code repeats, call for
service.
Oven and even No power to oven. Check the circuit breaker
control wi|l not or fuse. Make sure the
work° power cord is plugged in.
Oven temperature Thermostat calibration. See the adjustments
seems inaccurate, described following this
section.
Oven will not Clean cycle is not Oven temperature must
unlock, finished, drop below the lock
(Upper Oven) temperature before the
door will unlock.
Oven light will a, Light switch is in a° Check oven light
net 'work° off position, switch on the control
panel.
h° Oven light bulb h° Check the oven
burned out. light bulb.
Oven did net a° Controls were not set a° Check the self-cleaning
clean or results
were peer.
(Upper Oven)
properly.
b° Clean cycle was h°
interrupted.
c° Oven was soiled c°
heavily.
section of this manual.
The normal clean cycle
should last 4 hours.
Heavy spillovers
should be removed
before the cycle is set.
You can also repeat
the cycle.
22
Loading ...
Loading ...
Loading ...