Loading ...
Loading ...
Loading ...
13
G-Sensor Emergency Recording: During video recording, the DrivePro will automatically activate
Emergency Recording mode when detecting a collision.
If the G-Sensor sensitivity is set to “High”, even minor shocks will activate Emergency
Recording mode.
If the G-Sensor sensitivity is set to “Low”, only significant shocks will activate Emergency
Recording mode.
G-Sensor sensitivity can be adjusted or disabled in the Settings menu.
Note: The earliest emergency file will be overwritten by the latest emergency file recorded.
4-3 Parking Mode Recording
After the car engine is switched off, the DrivePro can automatically enter Parking mode and record
footage when motion or collision is detected. Parking mode is disabled by default and can be
enabled in Settings.
Note: After the car engine is switched off, enabling Parking mode will drain the DrivePro’s built-in
battery.
During Parking mode, the LCD display will turn off; the LED indicator will be solid red on standby.
When a motion or collision of the vehicle is detected, the DrivePro will record footage of about 15
seconds; the display will turn on and the LED will flash red. The display will turn off again if no more
motion/collision is detected in about 15 seconds. The DrivePro will resume Normal Recording
mode when the engine is switched on again (connected to power).
Transcend’s car lighter adapter does not supply power after the engine is switched off. If long-term
recording in Parking mode is required, please use an external power supply. Enter the Parking mode
manually by long-pressing the button during video recording. To power off the DrivePro,
long-press the button again.
Low Battery
Please charge the DrivePro immediately after the Low Battery warning is shown onscreen to avoid
errors happening to the system time. Please avoid using the built-in battery to record videos
directly.
Loading ...
Loading ...
Loading ...