Loading ...
Loading ...
Loading ...
Remove the Support Bar
[] Remove all packing materials.
[] Remove the two 3/16"x3/8" Phillips Head Screws
and then remove the Support Bar.
Note: the Support Bar is used to reinforce the Cart
Frame Assembly during shipping and must be
removed to roll out the Serving Cart.
/
/
/
/
/Top Panel
To Level Serving Cart Module
[]
[]
Support Bar
Fig. 1
/
/i
\- ......./ Wrench
/
Level Adjuster
Level Adjusters are located on the underside of the Module as shown in Fig. 1.
Adjust the 4 preassembted Level Adjusters using the wrench provided.
- Turning adjusters clockwise raises the height.
- Turning adjusters counterclockwise lowers the height.
IMPORTANT: For illustration purpose the Module is shown
on a tilted angle. FOR YOUR SAFETY-DO NOT TILT your Module at any time.
/
Wrench
Qty. 1
Part # P05515017L
(The wrench is not provided, please find it from
16655900 grill pack)
DO NOT lift Module from the Top Panel when moving
or assembling the unit.
H nstall Cart Handle
[] Unscrew two Philip Head Screw 3/16"x 3/8" and Spring Washer 3/16" from Cart Handle.
[] Install the Cart Handle to Cart using Phillips Head Screw 3/16"x3/8" and Spring Washer 3/16".
1_ Install the Serving Cart
[] Push the Serving Cart into the Cart
Frame Assembly as shown.
Cart Frame Assembly
Serving Cart
When you have finished assembling this
module be sure that all screws are
tightened for safe operation of the unit.
8
Loading ...
Loading ...
Loading ...