Loading ...
Loading ...
Loading ...
UNDERMOUNT INSTALLATION
8. Clean underside of the countertop and around cut-out area,
making sure area is smooth and free of defects.
9. Apply a bead of sealant to the rim of sink, near the inside edge.
Be careful not to miss or skip any area.
10. Carefully lift sink squarely under counter top cut-out. Press
firmly on sink to form seal and seat sink.
Using a damp cloth, immediately wipe any excess sealant from
edge of sink.
Do not smear or spread any excess sealant on counter top or sink.
11. Turn all mounting bracket so they fit over sink rim. Check
alignment of sink in cut out, adjust alignment as necessary. Tighten
fasteners to secure sink.
12. Connect water supply lines to the faucet and complete the
faucet installation. Connect drain assembly, hand tighten first to
check alignment. Secure joint for water-tight assembly.
Loading ...
Loading ...