Loading ...
Loading ...
Loading ...
Doesn't Run
Doesn't Heat
Doesn't Dry
Is Noisy
Control Knob
Advances Slowly
. Be sure the door is latched shut.
. Be sure the power cord is plugged into a live electrical outlet.
. Check the home's circuit breaker and filses.
. Press the START button again if the door is opened dming the cycle.
. Check the home's circuit breaker and filses.
. Select a heat setting, not air-fluff
. On a gas dvyec check that the gas supply is on.
. Clean the lint filter and exhaust duct.
. Check all of the above, plus...
. Be sure the exhaust hood at the outside of the home can open and close freely.
. Use 4" rigid metal exhaust duct.
. Do not overload. 1 Wash load = 1 Dryer load.
. Sort heavy items fiom lightweight items.
. Check that the washer is draining properly to extract adequate water tiom
the load.
. Check the load %r objects such as coins, loose buttons, nails, etc.
Remove promptly.
. Be sure the dryer is leveled properly as outlined in the installation manual
. Be sure the robber feet are installed on the leveling legs.
. This is normal operation %r an IntelliIh T cycle, especially at the beginning of
cycle. Once the load begins to dry, the control knob will start to advance. The
rate of advancement will be slow at the beginning of the cycle because there is
more moisture in the load. As the load becomes more dry, the control knob will
advance more quickly.
Approx. 36 gallons
Large (30 Imperial gallons; 136 liters)
Approx. 28 gallons
Medmm (23 Imperial gallons; 106 liters)
Approx. 22 gallons
Small (18 Imperial gallons; 83 liters)
Approx. 41 gallons
Large (34 Imperial gallons; 155 liters)
Approx. 33 gallons
Medmm (27 Imperial gallons; 125 liters)
Approx. 26 gallons
Small (22 Imperial gallons; 98 liters)
13
Loading ...