Loading ...
Loading ...
Loading ...
15 / 32 EN
Refrigerator / User Manual
Installation
4.2 Appropriate installation location
t*OTUBMMUIFQSPEVDUBUMFBTUwDNBXBZ
from heat sources such as cooktops, ovens,
space heaters, radiators and stoves at least
2” (5 cm) away from electrical ovens. Product
NVTUOPUCFTVCKFDUFEUPEJSFDUTVOMJHIUBOE
kept in humid places after installation.
t%POPUQMBDFUIFQSPEVDUPOUIFNBUFSJBMTTVDI
as rugs or carpets.
t1MBDFUIFQSPEVDUPOBOFWFOGMPPSTVSGBDFUP
prevent wobbling.
t%POPUJOTUBMMUIFQSPEVDUJOQMBDFTXIFSFUIF
temperature falls below 50F°/10ºC.
C
If two refrigerators are to be installed side
by side, there should be at least 1 1/2”
(4 cm) distance between them.
t.BLFTVSFUIBUTVGGJDJFOUSPPNJTQSPWJEFE
around the appliance to ensure free air
circulation.
t'PSQSPQFSGVODUJPOBMJUZUIFSFTIPVMECFB
gap of at least 1 3/8” (35 mm) between the
refrigerator and the rear wall.
To ensure this,
attach the gray, circular buffers, to be installed
on the rear back metal cover of the refrigerator.
These are shipped inside the crisper drawer in
the Fresh Food compartment.
4.1 Before Installation
t#FGPSFJOTUBMMJOHCFTVSFUIFPQFOJOH
measurements are sufficient to receive the
product and that the appropriate electrical and
plumbing connections are present.
t3FGFSUPUIFOFBSFTU"VUIPSJ[FE4FSWJDF"HFOUGPS
installation of the product. To make the product
ready for use, make sure that the electricity
installation is appropriate before calling the
"VUIPSJ[FE4FSWJDF"HFOU*GOPUDBMMBRVBMJGJFE
electrician to have any necessary arrangements
carried out.
t:PVSQSPEVDUDPNFTXJUIBOJOUFSOBMXBUFSGJMUFS
Part number of the filter is 4918450200 and
you can use this part number when ordering
replacement filters.
C
Preparation of the location and electrical
installation at the place of installation is
under customer's responsibility.
C
Plumbing: The refrigerator should only
be connected to the cold water line.
B
Product must not be plugged in during
installation. Otherwise, there is the risk of
EFBUIPSTFSJPVTJOKVSZ
B
WARNING: Installation and electrical
connections of the product must be carried
PVUCZUIF"VUIPSJ[FE4FSWJDF"HFOU
Manufacturer shall not be held liable for
damages that may arise from procedures
carried out by unauthorized persons.
A
WARNING: Prior to installation, visually
check if the product has any defects on
it. If so, do not have it installed. Damaged
products cause risks to your safety.
Loading ...
Loading ...
Loading ...