Loading ...
Loading ...
Loading ...
CLEANING AND MAINTENANCE - 5191477A859/A
e
Pyrolytic function setting
1. Turn the function knob to the symbol.
2. Press followed by .
3. Press and hold and use or to
set the cleaning cycle time from a minimum
of 2 hours to a maximum of 3 hours.
4. Two minutes after the pyrolytic cycle has
started the door is locked (the door lock
indicator light comes on) by a device that
prevents the door from being opened.
5. At the end of the pyrolytic cycle, the door
remains locked as long as the temperature
inside the oven returns to safety levels.
6. At the end of the pyrolytic cycle, wait for the
oven to cool down and collect the residues
deposited inside with a damp microfibre
cloth.
Setting of programmed pyrolytic cycle
It is possible to program the pyrolytic cycle start
time like all other cooking functions.
1. After selecting the pyrolytic cycle duration,
press the temperature knob. The display
shows the current time and the indicator
light comes on.
2. Turn the temperature knob to set the time at
which you wish to complete the pyrolytic
cycle.
3. After a few seconds, the and
indicator lights remain on steadily and the
appliance waits for the set start time to start
the cleaning cycle.
End of pyrolytic function
1. Turn the function knob to position 0 to exit
the function.
2. Open the door and collect the residue
deposited inside the oven cavity with a
damp microfibre cloth.
Extraordinary maintenance
Seal maintenance tips
The seal should be soft and elastic.
• To keep the seal clean, use a non-abrasive
sponge and wash with lukewarm water.
Replacing the internal light bulb
1. Completely remove all accessories from
inside the oven.
2. Remove the rack/tray support frames.
3. Use a tool (e.g. a spoon) to remove the bulb
cover.
It is not possible to select any function
once the door lock device has been
activated.
During the pyrolytic cycle,
the fans produce a more intense
level of noise due to a
greater rotation speed. This is normal
and
is intended to provide
a more effective
heat dissipation. At the end the pyrolytic
cycle,
the fans will automatically
continue to operate for long
enough to avoid overheating the walls
of adjacent units and the front of the
oven.
It is not possible to select any function
once the door lock device has been
activated.
We recommend wearing rubber gloves
for these operations.
For easier manual cleaning of parts that
are difficult to reach, we recommend
removing the door.
Power voltage
Danger of electrocution
• Unplug the appliance.
• Wear protective gloves.
Take care not to scratch the enamel of
the oven cavity wall.
Loading ...
Loading ...
Loading ...