Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com
7
HOW TO INSTALL LED LIGHTING
19
Screw Filter Cartridge (B)
onto Filter Connector (N).
20 21
Add Filter Protector Cover
(C) onto Filter Cartridge (B).
Add water to level.
No higher than ‘MAX’ level.
Double lock clips with
Safety Locking Keys (H).
22 23
FIT LED LIGHTS LOOSELY TO ALLOW THE INFLATABLE POOL SPA TO EXPAND
WHEN FILLED.
Correct installation of your LED lights is extremely important. Failure to follow
instructions carefully may result in their early failure. Correct installation will ensure
they stay working every time you use your Inatable Pool Spa. Ensure lights are not
installed too tightly, they must be tted loosely, with freedom to move between the
retention loops on the base of the hot tub to allow the lighting strip to expand when
lled with water.
Allow some excess strip across each gap, this will reduce stress on the lighting.
Failure to do this can reduce the lifespan of your lighting.
Set temperature on control
panel*. Clip on Top Cover
(E) to retain the heat.
*See page 10 for full
operating instructions.
IMPORTANT NOTE BEFORE FILLING YOUR INFLATABLE POOL SPA
If your Inatable Pool Spa comes with LED lights,
please follow the instructions on page 8.
Loading ...
Loading ...
Loading ...