Loading ...
Loading ...
www.SereneLifeHome.com
3
• Soaking in hot water during pregnancy can cause damage to the unborn foetus.
If you have any specic concerns please consult your doctor before continuing to
use your hot tub.
• Use of alcohol, drugs or medication before or during use of your Inatable Pool Spa
can increase risk of drowning.
• Those with history of heart disease, low/high blood pressure, circulatory system
problems or diabetes should consult a doctor before using Inatable Pool Spa.
People using medication should consult their doctor before using the Spa.
Some medications may cause drowsiness, whilst other medication may aect heart
rate, blood pressure and circulation during use.
• Water in a Inatable Pool Spa should never exceed 42°C (107°F).
Operating temperatures between 38-40°C (100-104°F) are considered safe for a
healthy adult. Lower temperatures are recommended for younger children, and
when use exceeds 10 continuous minutes.
• A max temperature of 42°C can be programmed for the water - Once cover is removed,
water temperature will automatically drop as heat is released through evaporation.
The additional 2°C compensates for heat loss that may occur. Once you are ready to
use, reduce maximum temperature to recommended 38-40°C (100-104°F) and
ensure that temperature reading is no greater than 40°C.
• Immediately get out of your Inatable Pool Spa if you feel uncomfortable or sleepy.
• Do not turn Inatable Pool Spa on when it is empty. This could cause irreparable
damage to pump system which would nullify any warranty period.
• To avoid damaging your pump & heating system during colder weather, your
Inatable Pool Spa is tted with 365 FreezeGuard Technology. Set the temperature
to 5°C, and this will prevent any water in the system from freezing.
• Always add chemicals to jug of water to avoid strong fumes or violent reactions
that may result in a hazardous chemical spray.
• To avoid accidental resetting of thermal cut-out, this appliance must not be supplied
through an external switching device, such as a timer, or connected to a circuit that
is regularly switched on and o by the utility.
• WARNING: Adequate drainage has to be provided to deal with overow of water.
• IMPORTANT: For set-up/installation, the surface must be smooth, at, level and
capable of evenly supporting the weight of the Inatable Pool Spa, water and users
e.g. 6 Person Square Inatable Pool Spa lled weight: 980kg (approx) plus combined
weight of occupants. It is the responsibility of the Spa owner to assure integrity of
the site at all times.
WARNING - PLEASE READ CAREFULLY!
Do not operate pump and heating system whilst the Pool Spa is empty.
This can damage the system and void your warranty.
Loading ...
Loading ...
Loading ...