Loading ...
Loading ...
Loading ...
40
After the tire pressure MIL turns on and maintenance is
performed, the tire pressure resetting function must be
performed to reset tire pressure and turn off the tire
pressure MIL.
Tire pressure resetting must be performed after
maintenance is performed in the following cases: tire
pressure is too low, tire leaks, tire pressure monitoring
device is replaced or installed, the tire is replaced, the tire
pressure sensor is damaged, and tire is replaced for the
car with tire pressure monitoring function.
ABS BLEEDING
Anti-lock Braking System (ABS) Bleeding allows you to perform
various bi-directional tests to check the operating conditions of
ABS.
1. When the ABS contains air, the ABS bleeding function must
be performed to bleed the brake system to restore ABS brake
sensitivity.
2. If the ABS computer, ABS pump, brake master cylinder,
brake cylinder, brake line, or brake fluid is replaced, the ABS
bleeding function must be performed to bleed the ABS.
3. After the oil in the brake oil tank is seriously insufficient or the
brake fluid is replaced, ABS Bleeding is also required
*Note
Loading ...
Loading ...
Loading ...