Breda LUDWT30250 24 Inch Fully Integrated Tall Tub Pro Panel Ready Dishwasher with 17 Place Setting Capacity, 6 Wash Cycles, 5 Washing Temperatures, 43 dBA, AUTO+SpeedWash, Total Dry Door Pop Out and Energy Star Certified

User Manual - Page 27

For LUDWT30250.

PDF File Manual, 34 pages, Read Online | Download pdf file

LUDWT30250 photo
Loading ...
Loading ...
Loading ...
ActionPossible causesProblem
If you want the dishwashing
program to continue, press any
button and close the door within
five seconds.
The dishwasher door has been
opened while a program is in
progress.
"STR" is shown on the display.
If you want to cancel the dish-
washing program, press and
hold the main power switch until
the display turns off.
Restart the dishwasher if the
program must be run in compli-
ance with the NSF/ANSI 184
standard.
In order to meet the require-
ments of the NSF/ANSI 184
standard, the door must not be
opened while the Pots+Pans
program is running with the
Sanitize option selected.
The Pots+Pans program has
been run with the Sanitize op-
tion selected, but "End" is not
shown on the display and the
Sanitize option button does not
light when the program has fin-
ished.
Restart the dishwasher if the
program must be run in compli-
ance with the NSF/ANSI 184
standard.
In order to meet the require-
ments of the NSF/ANSI 184
standard, the power must not
be cut while the Pots+Pans
program is running with the
Sanitize option selected.
Restart the dishwasher if the
program must be run in compli-
ance with the NSF/ANSI 184
standard.
The Pots+Pans program has
been run with the Sanitize op-
tion selected but has not
reached a sufficiently high tem-
perature to meet the require-
ments of the NSF/ANSI 184
standard.
Clean the coarse and fine filters.The filters are blocked.Water remains in the dishwash-
er above the filters.
Check that the filter handle is
locked in the stop position.
The filters are not fitted correct-
ly.
Clean the drain pump. See the
chapter Care and maintenance
instructions.
Debris in the drain pump.
Check that the colored stop on
the right in the bottom drain is
in place. See the chapter Care
and maintenance instructions.
Drain pump stop missing.
Check that the hose is free from
kinks and sharp bends.
Kink in drain hose.
Loosen the drain hose from
where it terminates. Check that
no debris has clogged the hose.
Is the cone-shaped part of the
drain boot cut to the maximum
size of the fitting where it attach-
es?
Blocked drain hose.
Clean with dish brush and low
foaming cleaner.
Dirt around the seals and in
corners.
Bad odor in dishwasher.
27
Loading ...
Loading ...
Loading ...