Loading ...
Loading ...
Loading ...
- Time remaining
Once you have chosen a program and options, the time the program took when last used is displayed.
Status light
The status light on the bottom part of the dishwasher indicates that a program has started.
Flashing light
A flashing light indicates that the door has been opened while a program is in progress. If it flashes
when the door is closed, an error has occurred. See the chapter Troubleshooting.
Status light
Stopping or changing a program
If you want to change the program after starting the dishwasher, open the door then press and hold
the main power switch until the display turns off. Add more detergent if the lid of the detergent dispenser
has opened. Then press the main power switch again to choose a new program.
WARNING!
The dishwasher door must not be open while a program is in progress. If the door is open, "STR"
is shown on the display. If you want the dishwashing program to continue, press any button and
close the door immediately. If you want to cancel the dishwashing program, press and hold the
main power switch until the display turns off.
If the dishwasher is turned off due to a power failure
If the program was not finished, the interrupted program resumes when power is restored.
NOTE!
During drying, the program is interrupted if the power is cut or the door is open for more than 2
minutes.
Once the program has finished
The end of the program is indicated by one short signal from the buzzer. The chapter Settings describes
how to change this function.
Moreover, the end of the program is indicated by the status light turning off. See Status light in the
chapter Using the dishwasher.
The dishwasher switches off automatically after the program ends.
To minimize the risk of leaks, we recommend that you turn off the water supply valve if away from
home for an extended period of time.
16
Loading ...
Loading ...
Loading ...