Loading ...
Loading ...
Loading ...
E11 E12
Getting Started
Unpack your Coffeemaker
Unpack your coffeemaker and remove all plastic bags,
cartons and any tape on the brewer.
WARNING: KEEP PLASTIC BAGS AWAY FROM CHILDREN.
Setting the Clock
Plug in brewer into an outlet. Press the HR and MIN buttons
to set the clock. Pressing any button other than HR or
MIN or 5 seconds of inactivity will set the clock at the time
selected.
Water Filtration System
Using the carbon-based water lter in your coffeemaker
during the brewing process helps remove up to 97% of the
chlorine from the water and improves the taste of your coffee.
To use the water ltration system, please follow these steps:
1. Align the red indicator on the frame to the letter that
corresponds with the month that you are using the disk
for the rst time. This serves to remind you to change the
disk every month (approx. 30 brewing cycles). To change
the disk, remove the used disk, insert new disk into the
frame.
2. Rinse the water lter in fresh
water before rst use.
3. Follow the instructions from the
“Brewing Coffee” section.
4. When you are done brewing,
rinse the water lter with fresh
water. Do not put your water
lter in the dishwasher.
To replace the water lter disks: slide the used disk from your
water ltration system. To insert the new disk, slide disk into
the frame.
Clean Before First Use
1. Wash the Parts - Wash the carafe and brew basket in a
mixture of mild detergent and water. Rinse each thoroughly.
2. Fill Water Reservoir – Fill the Water Reservoir with fresh
water to the MAX ll line.
3. Place Carafe – Set the Carafe on the warming plate.
4. Run without Coffee – Leave the Brew Basket empty. Press
the BREW NOW button once so that the Brew Now
Indicator is illuminated to begin the Cleansing Brew cycle.
There will be an audible signal when the brewing cycle is
complete. Once the unit stops dripping, pour the hot water
in the carafe into the sink.
Loading ...
Loading ...
Loading ...