Loading ...
Loading ...
Loading ...
Stop lifting and insert and lock the second Locking
pins (Safety pins) to prevent the system from going
into compression shifting the tilt of the module, and
consequently of the cluster.
Insert the front locking pins in the proper hole. These are
2 additional pins do not load the weight of the system but
serve to maintain the fixed angle between the modules
especially if they go into compression in very curved
systems
Pull out the front and rear pin from the cart and remove it
Remove all locking pins of the second cart cabinets and
preset the splay angles of all cabinets based on RCF Easy
Shape Designer software turning the rear bracket into the
upper module and inserting the pin in the proper position.
Fix the quicklock pin supplied with the speaker in the
proper hole in the front of the last speaker then lower the
height of the system in order to reduce the angle between
the speakers until they join.
SECURE THE
ANGLES WITH
THEIR RELATIVE
LOCKING PIN
SUSPENSION
ANGLE PIN 5°
LOCKING PIN
FOR SUSPENSION
PIN 5°
Loading ...
Loading ...
Loading ...