Loading ...
Loading ...
Loading ...
24
Complete Installation
Check that the power supply wire or cord does not touch
dishwasher motor or the lower part of the dishwasher tub.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
58. Power supply cord – Plug into a grounded 3
prong outlet
Plug into a grounded 3-prong outlet.
59. Reconnect power
Reconnect electrical power at the fuse box or circuit breaker
box.
NOTE: With the access panel off, start the dishwasher and
allow it to complete the shortest wash cycle. After the first 2
minutes, unlatch door, wait 5 seconds, and then open door.
Check that there is water in the bottom of the dishwasher tub.
Check that dishwasher is working properly
Install Access Panel
– For Plastic, begin with step 60
– For Metal, begin with step 63
Plastic Panel:
60. Reinstall access panel and fasteners
A
A. Insulation (on some models)
Place the plastic access panel against the dishwasher leg.
Make sure insulation does not interfere with the float
assembly.
61. Check access panel edge
Check that the lower edge of the access panel touches the
floor. Adjust if necessary.
62. Tighten fasteners
1/4
turn
A
B
C
A. Unlocked
B. Locked
C. 1/4 turn
Using a flat-blade screwdriver, turn the fasteners 1/4 turn
clockwise to lock into place. The fastener slot will be straight
up and down when properly locked. Go to step 65.
Loading ...
Loading ...
Loading ...