Loading ...
Loading ...
Loading ...
22
Option A: Waste disposer – no air gap
A
B
C
D
A. Disposer inlet
B. Drain trap
C. Drain hose
D. Large drain hose clamp
Helpful Tip: Remove disposer knockout plug.
1
1. Using a hammer and screwdriver,
knock plug into disposer.
2
2. Use needle-nose pliers to remove plug.
3
3. Attach drain hose to disposer inlet with
large drain hose clamp (provided). Use
pliers to squeeze clamp open and move
into position.
Option B: No waste disposer – no air gap
A
B
C
D
A. Waste tee
B. Drain trap
C. Drain hose
D. Large drain hose clamp
A
1
1. Fit rubber end (A) of drain hose to
waste tee and cut if needed.
NOTE: Do not cut ribbed section.
2
2. Attach rubber end of drain hose to
waste tee with a large drain hose clamp
(provided). Use pliers to squeeze clamp
open and move into position. If the
drain hose was cut, use a 1
1
/
2
" to 2"
(38 mm to 50 mm) screw-type clamp
(not provided).
Loading ...
Loading ...
Loading ...