Loading ...
Loading ...
Loading ...
B. REMOVE SHIPPING STRAP
Removing the shipping strap is
necessary for smooth operation.
If the shipping strap is not
removed, the washer will make
excessive noise.
To prevent floor damage, set washer onto
cardboard before moving across floor.
Move washer close to its final location.
STEP 1. Read, then remove the label
over the electrical plug and shipping strap.
STEP 2. Pull the yellow shipping strap
completely out of the washer. There
should be three cotter pins on the end
of the shipping strap when it is pulled
out of the washer. ]he electrical plug is
attached to this shipping strap.
STEP 3. Pull firmly to remove the
end of the shipping strap that remains
pinned to the back of washer. This will
release the rear self-leveling legs.
Pin
PULL
Electrical plug
0
STEP 4. Cut the shipping strap about
16 inches from plug end. Look for the
words "CUT HERE" Remove shipping
strap from the electrical plug.
Shippingstrap
Pin
NOTE: For use in securing the drain
hose, save the end of the shipping strap
that does not have the three cotter pins.
Discard the rest.
13
Loading ...
Loading ...
Loading ...