Loading ...
Loading ...
Loading ...
5
Location of the emergency stop switch:
The emergency stop button is located at the short end of the machine. When the switch is pressed in,
the roller will raise immediately.
Other risks
Certain risks cannot be eliminated through technical safety measures alone. There is a risk of crushing
and catching when the roller is pneumatically pressed against the flat bed. A warning symbol is
displayed on or immediately beside the roller. There is a risk of severe crushing and catching when the
roller is pneumatically pressed against the supporting bars. Never pressure-set the roller without first
ensuring that the sign material is positioned correctly underneath the roller.
Unauthorized use
The machine must only be used for its intended purpose as specified in this manual. All other use may
result in damage or injury, and is at the user’s own risk.
Installation & assembly
Rollover Flatbed Applicator should be assembled and used at normal room temperature with normal
humidity levels. This minimizes the occurrence of static electricity. Detailed instructions for mounting of
the roller/roller sliding arms is found in this binder.
Lifting instructions
The Rollover must be lifted with a forklift fitted with long forks. The forks must have a minimum length
of 7’, and a min. lifting capacity of 1000 kg. Upon arrival in the wooden crate, the pallet itself is the
reinforced lifting base, and the lifting positions are well marked. Once on the ground, unscrew the top
grid, remove with the forklift and loosen the machine from the pallet by removing the screws holding
each leg. When lifting the unit off the pallet for further transport or disassembly, the forks must be
positioned as indicated by the yellow stickers found on each of the long sides. It is very important that
the roller is close to the lifting point as well as fixed preventing it from sliding which potentially can
alter the point of gravity.
Loading ...
Loading ...
Loading ...