Loading ...
Loading ...
Loading ...
6.Operating Instructions
●Power on:Power on when connected to the power supply, the screen displays the boot icon, and then
displays a prompt to insert the soldering iron tip , The interface will be displayed after the soldering iron
tip is inserted .
●Heating: The icon button will flash, then short press the corresponding physical button to enter the
heating page , and the soldering iron will heat up.
280
℃
10%
280
SET
20V
●Temperature setting: In the heating page state, press the left and right keys to enter the temperature
setting page to set the temperature, short press the right button to add a step value, short press the left
button to decrease a step value. Long press to increase or decrease quickly, the step is 10°C or 20°F.
℃
280
10%
280
SET
80 420
280
℃
●Setting mode:In the non-temperature setting page, press and hold the left and right keys at the same time to enter
the setting mode .
Vol Select
Calibrate
Birghtness
Vol Select
Calibrate
Birghtness
●Screen brightness:In the setting mode, short press the left and right keys to switch to brightness ,
long press the right key to enter , and the left and right keys adjust, and long press any key to exit.
●One-key standby： Long press the right button on the heating page to turn off the heating and return to the
standby page .
280
℃
10%
280
SET
20V
15
Loading ...
Loading ...
Loading ...