Loading ...
Loading ...
Loading ...
24
2. Turn the locking knob of the
base filter cover to unlock
position.
3. Remove the base filter cover
and take out the base filter.
After several times of use, clean
the dust on the base filter with a
wet cloth or flowing water. After
using for a period of time, if there
is dust on the heat exchanger,
please remove the dust with
tools. Do not touch the heat
exchanger directly with your
hands to avoid injury.
4. Install the cleaned filter and
filter cover back to the original
positions, lock the knob and
close the heat exchanger door
cover.
7. Troubleshooting
When the machine fails to operate normally, it may not be a fault. Please refer to the
following methods for troubleshooting. If the fault still exists after self handling
according to the recommended method, please unplug the power supply and contact
us for after-sales service.
All consequences caused by the maintenance by the user himself or by hiring non-
professional after-sales personnel will be borne by the user.
The dryer cannot be
started
Check the power connection;
Confirm the "Start Pause" key is pressed down;
Confirm the door is closed properly;
The dryer cannot be
started and displays
"End"
Check whether the program setting is correct;
Confirm there are clothes in the drum;
Excessive drying time
Check whether the program setting is correct;
Confirm whether there are too many clothes
wrapping into clusters;
Check whether the filter screen is cleaned;
There will be air supply for cooling after drying in
some programs;
Poor drying effect
Confirm that the clothes have been dehydrated;
Check whether the program setting is correct;
Confirm that there are too many clothes;
Load is not properly sorted. Whether clothes that
are not easy to dry are mixed with clothes that are
easy to dry;
The remaining time of
the display stops or
jumps
The remaining time varies with clothing type, load,
dehydration and ambient temperature, which is a
normal phenomenon;
Fault phenomenon
Recommended handling method
House fuse is blown, circuit breaker has tripped,
or power outage has occurred.
Large load of heavy fabrics.
Check whether the filter screen is cleaned;
Clothes are wrinkled.
Clothes have dried too long. Try a shorter drying time.
Clothes have been left in the appliance for too long
after cycle ends.
25
Loading ...
Loading ...