Loading ...
Loading ...
www.SereneLifeHome.com
3
When breaking a connected string of modules (e.g. when disconnecting the DC
line from the inverter under load), a lethally strong arc can occur:
• Never disconnect the solar generator from the inverter while the inverter is
connected to the mains grid—remove the fuse from the AC side on the inverter
rst!
• Ensure cable connections in perfect condition (no splitting, soiling or other
contamination)!
GENERAL SAFETY INFORMATION
Ensure that the module is used only in applications for which it is suitable
(see Installing the modules ). All work on a PV system (installation, setup,
maintenance, repairs) must be carried out only by appropriately qualied
and authorized persons. The appropriate DIN standards, construction rules
and safety instructions are to be followed for installation.
UNPACKING THE MODULES AND STORAGE
The utmost care is required when handling the modules.
Be careful when unpacking, transporting, and storing the modules:
• Transport modules in an upright position.
• Carry modules with both hands. Do not use the connection socket as a handle.
• Ensure modules do not bow under their own weight.
• Do not place modules on top of each other.
• Do not subject to load, do not stand on them.
• Do not mark using sharp implements.
• Do not stand on the panel.
• Keep all electrical contacts clean and dry.
If it is necessary to store the modules temporarily, a dry, ventilated room should be
used.
INSTALLING THE MODULES
When installing the modules, please pay attention to: the assembly is to be
mounted over a re resistant roof covering rated for the application.
• Keeping within the maximum permitted load.
The maximum mechanical load on the module must not exceed 5400pa.
To avoid exceeding the maximum mechanical load, site-specic live loads such
as wind and snow should be taken into account.
Loading ...
Loading ...
Loading ...