Loading ...
www.SereneLifeHome.com
2
Carefully read through these installation instructions before installing,
operating or servicing PV system. Failure to follow these instructions may
result in bodily injury or damage to property. Keep these instructions!
Working on a PV system (installation, setup, maintenance, repairs) must be
carried out by qualied and authorized persons.
Electrical Characteristics
The tolerance of Electrical Characteristics is ±3% under standard conditions
(irradiance of 1000mW/cm2, AM 1.5 spectrum, and cell temperature of 25°C or
77°F.
WARNING:
Danger of death from electric shock!
•
Solar modules generate electricity as soon as they are exposed to light.
One module on its own is below the safety extra low volt level, but multiple
modules connected in series (summing the voltage) or in parallel (summing the
current) represent a danger. The following points must be observed when
handling the solar modules to avoid the risk of re, sparking and fatal electric
shock.
• Do not insert electrically conducting parts into the plugs or sockets!
Fit solar modules and wiring with wet plugs and sockets!
• Exercise utmost caution when carrying out work on wiring and safety equipment
(use insulated tools, insulated gloves, ect.)!
• Do not use damaged modules! Do not dismantle modules!
Do not mark on the rear of the module using sharp objects!
• Exercise utmost caution when working on wiring and the inverter.
Be sure carefully to follow manufacture’s installation instructions!
Articially concentrated sunlight shall not be directed on the module or panel.
Danger of death from arcing!
Modules generate direct current when light shines on them. An arc may be
produced when connections are separated. We therefore recommended covering
modules with a lightproof cloth during installation.
Loading ...
Loading ...
Loading ...