Loading ...
Loading ...
Loading ...
23
E
7.
Select Rotary Control to change the setting for the rotary laser.
• When
is selected, choose the rotation speed (150, 300,
600, or 1200).
• Select
15˚/45˚/90˚
and choose the rotation angle (0, 15, 45, 90, or
360) and the rotation direction (
or ).
• Select
and choose the Slope Setting, Axis Setting (X or
Y), Slope Configuration (% or degree), # degree or %.
8.
Use your cell phone to control the laser.
9.
When you are ready, turn the laser off from the Diagnostic screen.
Controlling the Laser from up to 1100’ Away
You can use Bluetooth
®
capability to pair the Detector DW0743DR (Red
laser) or DW0743DG (Green laser) with the DEWALT
®
Tool Connect™
application on your cell phone, and then use your cell phone to control
the laser (Figure
J
3
).
1.
From either or , download the DEWALT
®
Tool Connect™ application to your cell phone.
2.
On the laser keypad, press to turn the laser on.
3.
On the laser keypad, see if the blue LED next to is lit. If the
blue LED is already lit, the laser is probably already paired with
another smart device. You will need to unpair the laser from
the other device before you can pair it to the DEWALT
®
Tool
Connect™ application.
4.
Pair the DEWALT
®
Tool Connect™ application to the laser via a
Bluetooth
®
connection.
First Time Pairing Paired Before
1. On the D
EWALT
®
Tool
Connect™ application, click .
2. In the list of D
EWALT product
types, select Rotary Laser.
3. Enter a Name for the rotary
laser (e.g., DW080LRS/LGS).
4. On the laser keypad, press
and hold for 3-5 sec until the
Bluetooth
®
connection turns on
(blue LED starts blinking).
5. When the application lists
the laser’s model number as IN
RANGE, select it.
On the laser keypad,
press
to turn on the
Bluetooth
®
connection. The
blue LED will illuminate.
NOTE:
If the Bluetooth
®
connection does not turn on, replace the DEWALT
20V battery.
5.
On the laser keypad, press (Figure
A
6
) to turn on the
connection to the detector.
6.
On the DEWALT
®
Tool Connect™ application, press Add a detector.
7.
Enter a Name for the detector and press Connect.
8.
Turn on the detector and then press to turn on the Bluetooth
®
connection.
9.
The DEWALT
®
Tool Connect™ application will display information
about the laser on the Diagnostics screen:
• If the current settings are one of the “favorite settings” you have
saved for the laser, it will display the name of that setting (e.g.,
Main St - Site 1).
• If the laser is dropped, disturbed, etc., it will send messages to
the Tool Connect™ application to inform you.
• If the Tracking feature is on, the application will know where the
laser is and will let you know if the laser has been taken and is
now out-of-range. (The Coin Cell battery enables the Tracking
feature.)
Loading ...
Loading ...
Loading ...