Loading ...
Loading ...
Loading ...
21
E
Controlling the Laser from up to 50’ Away
The DW080LRS/LGS remote control allows you to operate and
set up the laser from up to 50’ away. The LED light on the remote
control (Figure
B
1
) indicates a signal is being transmitted from the
DW080LRS/LGS laser unit.
You can use all the buttons on the remote’s keypad to control the
laser unit. To completely power OFF a DW080LRS/LGS laser unit
using the Remote keypad, simultaneously press the X-Y axis button
(Figure
B
5
) and the Slope Mode button (Figure
B
2
).
By default, the laser unit is not paired to a remote (the laser unit is
in Public mode). LEDs on the laser unit and the remote will indicate
that they are not paired.
UNLOCKED
in Public Mode
LOCKED
in Private Mode
Description A laser is in Public Mode
if it is not paired with a
remote.
A laser is in Private
Mode if it is paired
with a remote.
A remote is in Public
Mode if it is not paired
with a laser.
A remote is in Private
Mode if it is paired
with a laser.
Control A Public laser can be
controlled by more
than one Public remote
(Figure
K
1
).
A Private laser can only
be controlled by the
remote to which it is
paired (Figure
L
).
A Public remote can
control more than one
Public laser (Figure
K
2
).
A Private remote can
only control the laser
to which it is paired
(Figure
L
).
LEDs
The unlocked
LED
will be lit on the laser
keypad (Figure
K
1
and
K
2
).
The locked
LED
on the laser will be lit
(Figure
L
).
The locked LED on the
remote will NOT be lit
(Figure
K
1
and
K
2
).
The locked LED on
the remote WILL be lit
(Figure
L
).
Pairing the Laser to a Remote
To pair the laser unit to one remote, simultaneously press and hold
15˚/45˚/90˚
on the laser keypad and
15˚/45˚/90˚
on the remote. LEDs on the laser
and the remote will indicate that they are paired (in Private mode).
• The laser unit will beep twice and the locked
LED (Figure
A
4
) on the laser keypad will blink twice and then remain green
to indicate that currently only one remote can control the laser
(Figure
L
)
• The locked LED on the remote (Figure
B
8
) will blink twice and
then remain red.
If You Stop Using a Paired Remote
If you stop using a remote that has been paired with a laser unit (remote
is in Private mode), the remote will automatically reset back to Public
mode. You will not be able to use the remote to control the laser unit. The
Lock LED on the laser keypad will remain lit, but you can only use the
laser keypad to control the laser.
If... Result
No buttons are pressed on the
remote keypad right after it is
paired with a laser unit.
Within 1 minute, the remote will
be reset back to Public mode.
Buttons are pressed on the
remote keypad after it is paired
with a laser unit.
After 8 hours, the remote will be
reset back to Public mode.
To change the remote back to Private mode so it can again control the
laser unit, press and hold
15˚/45˚/90˚
on the remote keypad.
If You Turn OFF a Paired Laser Unit
If you use the laser keypad to turn off a laser unit that is paired with a
remote, turning the laser back on will not automatically re-establish the
Private connection with the same remote again.
• The remote that had been paired with the laser unit will remain in
Private mode with the Lock LED still lit, but it will not be able to control
any laser unit.
• The laser unit will default to Public mode and can be controlled by any
remote except the remote that is still in private mode.
Loading ...
Loading ...
Loading ...