158.19460
158.19461
Distribution of NHdlo Swing
STRAIGHT STITCH ATTACHMENT ZIGZAG BITE FOOT CONTROL
POSITION DIMENSION
(.I':NI't:g 1.t£¢ BAR 5.8 _ I h
PRESSERFOOTHEIGHT
LOW BAR TYPE
6 MM
_÷
52 MM
NEEDLE PLATESURFACE
HIGH BARTYPE
MINIMUM
62 MM
SUPERHIGHBARTYPE
29 MM
52 MM
Set the special stlt'_h dial at red dot and stitch width
('_ntrol at 4. Tower needle to the lowest posiUon,
Loosen set screw (A) slightly, and slide the ztgXal
v,lrtth bracket (B) to either direction, until you can
(,htam the equal clearance between the needle and
the edge of needle slot a both left and right needle
positron. Tighten the screw securely after
adjustment.
A
FRONT FACING SHUTTLE
SIDE FACINGSHUTTLE
SUPERHIGH BAR LOW BAR
U
HIGH BAR LOW BAt4
FIGURE C-19
Dropfeed dog Pressdownpressureregulatorto fhe maximumpressure Lower,_res';,J,etootlever Loosenthumbscrewandbe
sure presser foot is seated properly T,ghten thumb screw
ff adlustmentis ne_.essan/raise presserfoot lever and loosenscrewson presserbar holder Adlustthe he,ght ofpresserfoot
fromneedle plate as speclfrerJConfirmthe herght of presser foot by e complete,*urnof the handwheel Tightenthe screws
secerely tiler adlostment
FIGUREA.I
Loading ...
Loading ...
Loading ...
