Loading ...
Loading ...
Loading ...
23
1. Remove the backrest from the Booster Seat.
(See Removing the Backrest, page 25.)
2. Place the Booster Seat on the vehicle seat.
3. Set the child in the Booster Seat.
Make sure the child’s back is at against the vehicle
seat, and the child’s bottom is at against the Booster
Seat.
4. Secure the child and Booster Seat to the
vehicle seat.
Stretch the lap/shoulder belt across the child and
fasten the buckle. Both the lap and shoulder belts
MUST be positioned under the armrest on the Booster
Seat.
5. Use the shoulder belt clip, if necessary.
If the shoulder belt does not properly lay midway
between the child’s shoulder and neck, attach and
adjust the belt clip (see Using the Shoulder Belt Clip,
page 26).
6. Check your work.
Make sure the lap belt is stretched low and snug
across the child’s hips, and fastened into the buckle.
The shoulder belt must cross the child midway
between his/her shoulder and neck.
Note: If the vehicle’s shoulder belt naturally crosses
the child’s shoulder, you do not need to use the
shoulder belt clip.
WARNING!
DEATH or SERIOUS
INJURY can occur.
Installation Checklist
The shoulder belt MUST NOT cross the child’s neck
or fall off the child’s shoulder. If you cannot adjust the
shoulder belt to properly lay midway between the child’s
shoulder and neck, try another seating location or do not
use the Booster Seat.
IMPORTANT: Always secure the Booster Seat with
the vehicle seat belts when not occupied. An unsecured
Booster Seat can y into and injure other occupants in
the event of a crash.
Loading ...
Loading ...
Loading ...