Loading ...
Loading ...
Loading ...
16
7. Check your work. Inspect the Booster Seat. Pull up
on the headrest to make sure it is securely attached
to the backrest. Make sure the seat pad is hooked
into place. Pull on the backrest to make sure it is
securely attached to the base. Repeat any assembly
steps as necessary.
6. Install the backrest assembly. Position the base
under the backrest assembly. Slide the backrest
assembly onto the base. Make certain the backrest
assembly locks into place with an audible click.
5. Attach the seat pad
to the base. Connect
elastic loops to the hooks
on the back of the base.
Push retainer clips into
the corresponding holes
in the front of the base
and push UP to secure in
place.
CLICK!
Assembling Your Booster Seat
• If you purchased a
GoTime LX Booster,
please use the image
at right as reference
when connecting the four
elastic headrest loops to
the four corresponding
headrest hooks, then
refer back to page 15 for
the tabs and loops on the
backrest.
Loading ...
Loading ...
Loading ...