Loading ...
Loading ...
Loading ...
Installation Instructions
[] LEVEL THE REFRIGERATOR
The leveling legs have 2 purposes:
1) Leveling legs odjust so the refrigerotor is
firmlg positioned on the floor and does not
wobble.
2) Leveling legs serve Gs a stabilizing brGke
to hold the refrigerator securelg in position
during operotion ond cleoning. The leveling
legs olso prevent the refrigerator from
tipping.
[] Remove the grille bg removing the two Phillips
head screws.
[] Turn the leveling legs clockwise to raise
the refrigerator, counterclockwise to lower it.
./i CAUTION: To avoid possible
personal injurg or propertg damage,
the leveling legs must be firmlg touching
the floor.
[] Replace the base grille bg inserting the two
Phillips head screws.
[] SET THE CONTROLS
Set the controls to the recommended setting.
4b
bCOMMENOEOCON'ROLSE'T'"OS]
oisoff o_off
C!°'°ir_8 (Wormo_(!°"e00 (Wormor_
_, CDrd_,t 9 _,Cold_,t
5 5
IRECOMMENOEOCO"'RO"SETT'"OS]
AdjustFreezer AdjustRefrigerator
Temperature Temperature
19
[_] REMOVE PACKAGING, START
ICEMAKER (icemaker models)
A) Remove all tape, foam and protective
packing from shelves and drawers.
B) Remove the tie downs from the freezer
baskets.
C) Place half width basket onto drawer slides.
See About the freezer section for instructions.
Set the icemaker power switch to the I (on) position.
The icemaker will not begin to operate until it
reaches its operating temperature of 1S°F (-9°C) or
below. It will then begin operation automatically. It
will take 2-3 dags to fill the ice bin.
NOTE: In lower water pressure conditions, the
water valve mag turn on up to 3 times to
deliver enough water to the icemaker.
Loading ...
Loading ...
Loading ...