Makita XML11CT1 INSTRUCTION MANUAL

Loading ...

6 ENGLISH

ASSEMBLY

WARNING: Always be sure that the lock key

and battery cartridge are removed before carrying

out any work on the mower. Failure to remove the

lock key and the battery cartridge may result in seri-

ous personal injury from accidental start-up.

WARNING: Never start the mower unless it is

completely assembled. Operation of the machine

in a partially assembled state may result in serious

personal injury from accidental start-up.

Installing the handle

NOTICE: When installing the handles, be careful

not to pinch the cord between the handles. If the

cord is damaged, the mower switch may not work.

1. Align the hole in the lower handle with the hole

in the upper handle, then insert the bolt from outside,

and then tighten the thumb nut from inside. Perform the

same procedure on the other side.

For XML11

1 32

Fig.1

► 1. Bolt 2. Thumb nut 3. Lower handle 4. Upper

handle

For XML10

1 32

Fig.2

► 1. Bolt 2. Thumb nut 3. Lower handle 4. Upper

handle

2. Turn the knob 90° while pulling the knob on the

lower handle to release the locking pin. Perform the

same procedure on the other side. Raise the handle,

and then turn the knob on both sides 90°. Make sure

that the knobs are securely xed.

Fig.3

► 1. Knob

NOTE: Supporting the handle makes it easier to

release the locking pin when pulling the knob.

Loading ...

Makita XML11CT1 36V 18V X2 LXT 21" Self‑Propelled Lawn Mower