Makita DML810 18V X2 LXT Lithium‑Ion Cordless Upright L.E.D. Area Light, Light Only

User Manual - Page 7

For DML810.

PDF File Manual, 32 pages, Download pdf file

Loading ...
Loading ...
Loading ...
7ENGLISH
FUNCTIONAL DESCRIPTION
CAUTION: Always be sure that the appli-
ance is switched o󰀨 and the battery cartridge is
removed before adjusting or checking function on
the appliance.
Installing or removing battery cartridge
CAUTION:
Always switch o󰀨 the appliance
before installing or removing of the battery cartridge.
CAUTION:
Hold the appliance and the battery car-
tridge rmly when installing or removing battery cartridge.
Failure to hold the appliance and the battery cartridge rmly
may cause them to slip o󰀨 your hands and result in damage to
the appliance and battery cartridge and a personal injury.
CAUTION:
Be careful not to trap nger(s)
between the appliance and battery cartridge when load-
ing battery cartridge as well as between the appliance
and the battery cover when closing the battery cover.
To install the battery cartridge, release the cover lock,
and open the battery cover.
1
2
1. Cover lock 2. Battery cover
To install the battery cartridge, align the tongue on the battery
cartridge with the groove in the housing and slip it into place.
Insert it all the way until it locks in place with a little click.
Then close the battery cover.
1
2
1. Button 2. Battery cartridge
To remove the battery cartridge, slide it from the
appliance while sliding the button on the front of the
cartridge.
CAUTION: Always install the battery cartridge
fully. If not, it may accidentally fall out of the appli-
ance, causing injury to you or someone around you.
CAUTION: Do not install the battery cartridge
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
NOTE: Up to two battery cartridges can be installed,
although the appliance uses one battery cartridge for
operation.
Indicating the remaining battery
capacity
Only for battery cartridges with the indicator
1
2
1. Indicator lamps 2. Check button
Press the check button on the battery cartridge to indi-
cate the remaining battery capacity. The indicator lamps
light up for a few seconds.
Indicator lamps Remaining
capacity
Lighted O󰀨 Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
The battery
may have
malfunctioned.
NOTE: Depending on the conditions of use and the
ambient temperature, the indication may di󰀨er slightly
from the actual capacity.
Loading ...
Loading ...
Loading ...