Loading ...
Loading ...
Loading ...
13
92
8. With the help of a second person, position the
handrail assembly (E) below the Console (93)
as shown. Then, move both sides of the hand-
rail assembly upward at the same time, sliding
the inner corner (F) of the handrail assembly
between the Console (93) and the Console
Base (92).
Next, attach the handrail assembly (E) with
four 3/8" x 5 1/2" Screws (1) and four 3/8" Star
Washers (3) (only one side is shown); start all
four Screws, and then tighten them.
Then, tighten the four 5/16" x 3/4" Patch Screws
(108) (only one side is shown).
E
3
1
3
8
F
108
93
9. Slide the Right Inside Upright Cover (70) against
the lower end of the right Upright (83). Then,
press the Right Outside Upright Cover (71)
against the Right Inside Upright Cover until it
snaps into place. Make sure that the wires (G)
are not pinched.
Attach the Left Inside Upright Cover (not
shown) and the Left Outside Upright Cover
(not shown) as described above. Note: There
are no wires on the left side.
71
83
G
9
70
Loading ...
Loading ...
Loading ...