Loading ...
Loading ...
Loading ...
CUSTOMER RESPONSIBILITIES
MAINTENANCE SCHEDULE __e _e_,o_o_
oo.
AS YOU COMPLETE
,_:/'_q'_'..,;/'_.-_i_r S ERV iCE DATES
Check Operator Presence and
t Interlock Systems
Check for Loose Fasteners 1_#'7
Sharpen/Replace Mower Blades !4
Lubrication Chart
T Check Battery Level
RClean Battery and Terminals
Check Transaxle Cooling
Adjust Blade Belt(s) Tension _5
Adjust Motion Drive Belt(s) Tension Ks
Check Engine Oil Level _
Change Engine Oil _1_2,3
NE Clean Air Filter _1_ 2
Clean Air Screen 1_2
GInspect MufflerlSpark Arrester
Replace Oil Filter (If equipped) 11_12
N Clean Engine Cooling Fins 1_2
Replace Spark Plug I_'
Replace Air Filter Paper Cartridge
Replace Fuel Filter
1 - Change more often when operating under a heavy load or in high ambient temperatures 5 - if equipped with adjustable system
2 - Service more often when operating in dirty or dusty conditions. 6 - Not required if equipped with maintenance-free baftery.
3 - It equipped with oil filter, change oil every 50 hours. 7 - Tighten front axle pivot bolt to 35 ff -Ibs. maximum
4 - Replace blades more often when mowing in sandy soil Do net overtighten
GENERAL RECOMMENDATIONS LUBRICATION CHART
The warranty on this tractor does not cover items that have ZERK tq-- _
been subjected to operator abuse or negligence. To receive ',
full value from the warranty, operator mast maintain tractor
as instructed in this manual. BEARINGZERK
Some adjustments will need to be made periodically to
properly maintain your tractor.
All adjustments in the Service and Adjustments section of
this manual should be checked at least once each season.
Once a year you should replace the spark plug, clean or
replace airfilter, and check blades and belts forwear. A
newspark plug and clean airfilterassare properair-fuel
mixtare and help your engine run better and last longer.
BEFORE EACH USE
Check engine oil level.
Check brake operation.
Check tire pressure.
Check operator presence and
interlock systems for proper operation.
Check for loose fasteners.
ZERK
'_FRONT WHEEL
BEARING ZERK
16
I
(])GENERAL PURPOSE GREASE
@)REFER TO CUSTOMER RESPONSIBILITIES "ENGINE"
SECTION
IMPORTANT: DO NOT OIL OR GREASE THE PIVOT POINTS
WHICH HAVE SPECIAL NYLON BEARINGS. VISCOUS LUBRI-
CANTS WILL ATTRACT DUST AND DIRT THAT WILL SHORTEN
THE LIFE OF THE SELF-LUBRICATING BEARINGS. IF YOU
FEEL THEY MUST BE LUBRICATED, USE ONLY A DRY, POW-
DERED GRAPHITE TYPE LUBRICANT SPARINGLY.
Loading ...
Loading ...
Loading ...