Frigidaire FHWH084WB1 8,000 BTU Window Room Air Conditioner with Supplemental Heat

Use & Care - Page 19

For FHWH084WB1.

PDF File Manual, 26 pages, Read Online | Download pdf file

FHWH084WB1 photo
Loading ...
Loading ...
Loading ...
19OPERATING INSTRUCTIONS
FAULT CODES:
Error Code Description
EH00
Internal memory chip failure
When below error code show on the display, please contact your Authorized Frigidaire
Service Center.
EH60
Indoor ambient temperature sensor is open/short circuited
EH0b
Communication malfunction of main control board.
Note: The error code will be separated into 2 parts. The display will alternate in 1 second
intervals. For example, if the fault code "EH00" occurs, the panel will first display "EH" for 1
second, then display "00" for another second. The error code will continue to loop until the
issue is resolved. Please contact your Authorized Frigidaire Service Center.
SHOW “EH” FOR ONE SECONDS: THEN SHOW “00” FOR ANOTHER SECONDS:
There is a 2-Second delay for the
compressor shutting down when selecting
FAN ONLY. This is to cover the possibility
of having to roll through to select another
mode.
The control will maintain the set
temperature within 2 degrees Fahrenheit,
between 60°F and 90°F degrees.
After a power outage, the unit will
memorize the last setting and return the
unit to the same setting once power is
restored.
Now that you have mastered the operating
procedure, here are more features in your
control that you should become familiar with.
ADDITIONAL THINGS YOU SHOULD KNOW
NOTE
The "Cool" circuit has an automatic 3
minutes time delayed start if the unit is
turned o and on quickly. This prevents
overheating of the compressor and possible
circuit breaker tripping. The fan will
continue to run during this time.
TO TURN UNIT OFF:
DO THIS:
PRESS
ON/OFF BUTTON
When the unit is turned o, the display will
gradually fade away after 3 seconds. The unit
will always return to “Eco” mode and “Auto”
fan speed setting when it is turned on again.
YOU WILL SEE:
The unit should be operated in a
temperature range of indoor side 60°F -
90°F (16°C - 32°C), outdoor side 64°F -
109°F (18°C - 43°C). Performance may be
reduced outside of these operating
temperatures.
Loading ...
Loading ...
Loading ...