Loading ...
Loading ...
Loading ...
● Sensitivity indication cursor: It’s divided into 4 gears, when they are all
lighted; the sensitivity is at the highest. Adjust the sensitivity by the SENS
button. It is useless in the PINPOINT mode.
● Battery power cursor: 3 gears indicate the battery power. When all the
cursor is lit, this indicates power is enough. While the entire battery indicator
is extinct and the battery pattern is glimmered, it’s time to replace the battery
right away.
Controller
All the controllers are on the panel.（See Fig.7）
● Power button: press the button, the power is on,and press it once
more,the power is off.
● Mode button: Press the MODE button to choose from the 4 operation
modes circularly.Boot setting is in the ALL METAL mode.
ALL METAL-The detector is in the ALL METAL mode,and to all kinds of
metals,the detector will make a respond.
JEWELRY-the detector eliminates iron,which means it won’t make a
respond to the iron,but only be in respond to other metals.
MEMORY- the detector will memory the selected metal,and only be
respond to this metal.Press the MODE button once,the detector goes into
the MEMORY state(the MODE cursor pointing to MEMORY),at this
moment,the six lower cursors all displaying,and the detector goes into the
memory state.Scanning above the search coil with the selected metal,the
detector will memory this metal,and will only be respond to this metal.
Fig.7
Loading ...
Loading ...
Loading ...