Loading ...
Loading ...
Loading ...
13
SETTING OVEN CONTROLS
Setting the Clock
When the appliance is first powered up, 12:00 will flash in
the display. The time of day must first be set before
operating the oven.
To Set Clock to 1:30:
1. Press .
2. Enter 1 3 0 using numeric keys.
3. Press OK/START.
Important note:
The clock cannot be changed when a Self Clean, Delay
Start, or cooking feature is active.
Setting 12 Hour or 24 Hour display mode
The clock display mode allows you to select 12 hr or 24 hr
modes. The factory pre-set clock display mode is 12 hours.
To set 12 hr or 24 hr display mode:
1. Press and hold for 6 seconds.
2. Press Self Clean to toggle between 12 Hr day or 24 Hr
day display mode.
3. Press OK/START to accept the choice.
Setting Silent or Audible Control mode
Silent mode allows the oven control to operate without
audible tones. The control may be programmed for silent
operation and later reset to operate with all the normal
audible tones.
To set for silent or audible mode:
1. Press and hold Delay Start for 6 seconds.
2. Press the Self Clean key to toggle between bEEP On
or bEEP OFF (
Figure 3).
3. Press OK/START to accept the choice.
Changing between continuous bake setting or 12 hour
energy saving
The oven control has a factory preset built-in 12 Hour
Energy Saving feature that will turn off the oven if the oven
is left on for more than 12 hours. The control may be
programmed to override this feature to bake continuously.
To change between continuous bake or 12 hour energy
saving feature:
1. Press and hold Timer On-Off for 6 seconds
2. Press Self Clean to toggle between 12 Hour OFF or
Stay On feature (
Figure 4).
3. Press OK/START to accept choice.
Changing temperature display from Fahrenheit to
Celsius
The electronic oven control is set to display °F when
shipped from the factory. The display may be changed to
show either °F or ºC oven temperatures.
To change temperature display mode from °F to °C or
from °C to °F:
1. Press and hold Broil for 6 seconds.
2. Once F (or C) appears in the display, press Self Clean
to toggle between Fahrenheit and Celsius temperature
display modes (
Figure 5).
3. Press OK/START to accept the choice.
Important note:
The oven temperature display cannot be changed during
the cooking process or if a delay start has been set or self
clean is active.
Figure 3: Display showing audible and silent operation
Figure 4: 12 hr energy saving (L) continuous setting (R)
Figure 5: Display showing Fahrenheit and Celsius
Loading ...
Loading ...
Loading ...