Loading ...
Loading ...
Loading ...
30 en | Mixer operation EVOLVE Portable Column Loudspeaker
2020-04 | v04 | F.01U.381.064 User manual Electro-Voice
AUX control
The AUX control is primarily meant for establishing an independent mix, e.g. for monitor or a
second room/zone. The individual channel AUX controls will determine the amount of each
channel's post fader signal present at the AUX output if AUX OUT is set to AUX MIX.
COMP control
During operation, the input signal processing can be adjusted by using the COMP control to
control the on board compressor. Compressors are available on INPUTS 1-4. Adjust the
COMPRESSOR threshold and compression ration simultaneously using the COMP adjustment.
As the COMP control is adjusted from 0 to 100, the gain below the threshold will increase
from 0 to 10 dB and the compression ratio will increase from 1:1 to 8:1. The compressor will
reduce the dynamic range of the audio signal proportional to the compressor setting. Once
the signal exceeds a certain threshold, the signal gets compressed, i.e. major input level
changes result in minor output level changes. Narrowing the dynamic range often allows for
easier recording or mixing the audio signal. It is recommended to start with low to moderate
levels of compression (25-40) and increase slowly if necessary.
Loading ...
Loading ...
Loading ...