Loading ...
Loading ...
Loading ...
16
4. Press SELECT again to display the “Recharge
Days” screen.
MAXIMUM DAYS BETWEEN REGENERATIONS:
The electronic controller automatically determines
regeneration fre quency. This provides the greatest
operating efficiency and, under most conditions this
feature will be left in its default mode. However,
you can set this feature to force a regeneration
every set number of days. You may want to do this
if, for exam ple, your water supply contains iron and
you want the softener to regenerate at least once
every few days to keep the resin bed clean. Use
the
r UP or s DOWN buttons to change the
number of days (up to 15).
5. Press SELECT again to display the “97%” screen.
97% FEATURE: The 97% Feature can save salt
and water by regenerating when 97% of the soften-
er’s capacity has been used up. With this feature
ON, the regeneration can occur at any time (when-
ever the system has reached 97% of its capacity).
The default is OFF. If this feature is desired, turn it
on by pressing the
r UP button.
Example:
Set to 4 days maxi mum
between regenerations
Default Display
6. Press SELECT again to display the “12 or 24 hr”
screen.
12 OR 24 HOUR CLOCK: All time displays are
shown in standard clock time (1 to 12 AM; and 1 to
12 PM) at the 12 hr default setting. If 24 hour time
format is desired, set to 24 hr by pressing the
r
UP button.
7. Press SELECT again to display the “Backwash
Time” setting screen.
BACKWASH & FAST RINSE TIMES: If you expe-
rience salty tasting water after regeneration, you
may need to increase the backwash and fast rinse
times. The default backwash and fast rinse times
depend on the model. However, you may increase
or decrease the backwash and fast rinse times, in
1 minute increments.
If you wish to change the backwash time, use the
r UP or s DOWN buttons to set the backwash
time between 1 and 30 minutes.* Then press
SELECT to display the “Fast Rinse Time” setting
screen.
If you wish to change the fast rinse time, use the
r UP or s DOWN buttons to set the fast rinse
time between 1 and 30 minutes.*
* Setting backwash and/or fast rinse times too low
may result in salty tasting water after regeneration.
8. Press SELECT to return to the normal run (time of
day) screen.
FIG. 30
FIG. 31
FIG. 32
Controller Features
FIG. 33
FIG. 34
Loading ...
Loading ...
Loading ...