Loading ...
Loading ...
Loading ...
Style 1
To remove the plastic cover:
1. Remove crisper(s).
2. Lift cover front and remove the cover support.
3. Lift cover up and slide out.
Style 2
To remove the glass cover:
1. Pull the glass straight out.
2. Replace in reverse order.
To replace the cover:
1. Fit cover tabs into lowest cabinet slots and push in.
Lower the front retainers into place.
2. Insert cover support (with the long tab toward the front)
into the groove on the underside of the cover,
NOTE: If the support needs adjustment, turn base
clockwise to raise or counter-clockwise to lower,
v-"_ .' "_O_;;I;;;PD
To turn the ice maker on:
The on/off switch for the ice maker is a wire shut-off arm
located on the side of the ice maker.
1. Lower the wire shut-off arm.
\
2. Listen for the sound of water filling and ice dropping
into the bucket.
NOTE: The ice maker will not make ice until the freezer is
cold enough.
3. Allow 24 hours to produce the first batch of ice. The ice
maker should make 7 to 9 batches of ice in a 24-hour
period, Discard the first three batches of ice produced.
To turn the ice maker off:
1. Automatic turn off: As ice is made, the ice cubes will fill
the ice storage bin, and the ice cubes will raise the wire
shut-off arm to the OFF (arm up) position.
2. Manual turn off: Lift the wire shut-off arm to the OFF
(arm up) position and listen for the click to make sure
the ice maker will not continue to operate
REMEMBER:
Allow 24 hours to produce the first batch of ice.
Discard the first three batches of ice produce to avoid
impurities that may be flushed out of the system.
The quality of your ice will be only as good as the
quality of the water supplied to your ice maker,
Avoid connecting the ice maker to a softened water
supply. Water softener chemicals (such as salt) can
damage parts of the ice maker and lead to poor quality
ice, If a softened water supply cannot be avoided,
make sure the water softener is operating properly and
is well maintained,
• It is normal for the ice cubes to be attached at the
corners. They will break apart easily.
• Do not force the wire shut-off arm up or down.
• Do not store anything on top of the ice maker or in the
ice storage bin.
16
Loading ...
Loading ...
Loading ...