Loading ...
Loading ...
Loading ...
29
Operating Instructions for A100is Snap On Compact Low Pressure Regulator – 2531CS-0140:
Please read thoroughly before use and retain for future reference.
Connecting and operating conditions:
1. The “Snap On Compact” is a domestic regulator designed to supply gas to consuming
appliances at a pressure and capacity as indicated on the identification label (1).
2. The “Snap On Compact” can be fitted to any cylinders equipped with automatic valves, having
a diameter as indicated on the regulator (2).
3. The gas cylinder must always be used in the upright position.
4. Whenever used outdoors the “Snap On Compact” should be suitably protected against rain.
5. Never use a flame to look for leaks. Use a soap solution.
6. In case of any difficulties or problems, close the gas supply immediately and contact the
dealer.
7. Never move or displace the gas cylinder when it is on.
Fitting the hose:
1. Before connecting the “Snap On Compact” to cylinder valve, take care to fit a regulation
rubber hose (3) to the barbed stem (lubricate the latter with water to facilitate the insertion).
To guarantee a sound connection use a hose clamp (4), which is usually sold together with the
hose and matches the hose dimensions.
Connecting to the Gas Cylinder:
1. Ensure that all taps on the consuming appliance are closed.
2. Ensure that the connecting pipe to the consuming appliance is correctly fitted.
3. Ensure that the “Snap On Compact” regulator handle is in the ‘OFF’ position.
4. With no flame on, remove the seal cap from the automatic valve.
5. Place the “Snap On Compact” onto the valve and push down vertically and firmly. There will be
an audible click, confirming that the regulator is securely latched.
6. The “Snap On Compact” is designed to prevent it from being fitted to the valve, unless the
regulator handle is in the ‘OFF’ position. Therefore never attempt to mount or to dismount it
when the handle is not in position.
Loading ...
Loading ...
Loading ...