Loading ...
Loading ...
Loading ...
25
Using Your Appliance:
Lighting Instructions: Main Burners:
1. Open the lid before lighting.
2. Connect the gas cylinder to the barbecue following the instructions supplied with the
regulator.
3. Turn all the control knobs to the ‘OFF’ position.
4. Turn ‘ON’ the gas supply at the cylinder or regulator switch following the regulator connection
and operating instructions.
5. Check the cylinder to regulator connection and hose to barbecue hose inlet connection for
leakage using soapy water. Any leakage will show as bubbles in the area of the leak. If leak is
found, do not use the barbecue. Consult your gas or barbecue supplier for advice.
6. To light the left hand burner, push in and turn the left burner control knob anti-clockwise
to the 90° position (‘Hi’ position). An audible click will be heard, and the burner should light.
Check that the burner is alight. If the burner has not lit, repeat this process.
7. If the burner has not lit after two attempts, turn ‘OFF’ the control and the gas cylinder valve.
Wait 5 minutes before retrying the ignition sequence.
8. When the burner has lit, the burner rate can be adjusted by pushing in and turning the knob
anti-clockwise to any position between the ‘Hi’ and ‘Lo’ rate position.
9. Light the remaining burners from left to right in sequence.
10. To turn ‘OFF’ the barbecue, turn the cylinder valve handle or regulator switch to the ‘OFF’
position by following the regulator instructions. Once the burners have extinguished turn all
the control knobs to the ‘OFF’ position.
11. Wait until the barbecue is sufficiently cool before closing the hood.
NOTICE
Food can be cooked with either
the lid open or closed. The lid can
be kept closed for 5 minutes before
opening for 1 minute to release heat.
Lighting Instructions: Side burner:
Use the side burner for grilling, sautéing, frying and sauces. Use pots with a base of 200-220mm.
1. Once the grill burner has been lit, the side burner can be lit by following the instructions below.
2. Open the side burner lid before lighting the side burner and turn the side burner control knob
to the ‘OFF’ position.
3. Push in the side burner control knob and keep depressed whilst turning anti-clockwise to the
‘Hi’ position, an audible click will be heard, this will light the burner. If the burner does not light,
repeat this process.
4. If the burner has not lit after two attempts, turn ‘OFF’ the control and the gas cylinder valve.
Wait 5 minutes before retrying the ignition sequence.
5. When the burner has lit, the burner rate can be adjusted by pushing in and turning the knob
anti-clockwise to any position between the ‘Hi’ and ‘Lo’ position.
6. To turn ‘OFF’, turn control knob to the ‘OFF’ position.
7. After use, close the gas supply by either turning ‘OFF’ the switch on the regulator or turning
‘OFF’ the cylinder valve.
8. Wait until the barbecue is sufficiently cool before closing the lid.
WARNING
FOR YOUR SAFETY:
In the event of light back whilst the appliance is in use:
Turn all the controls, cylinder valve and regulator switch
to the ‘OFF’ position. Wait 5 minutes before attempting
to relight the appliance. If the problem persists after
relighting, consult your gas dealer, a qualified gas
engineer or customer services for assistance or repair.
Never try to rectify the problem yourself as this could
result in serious injury and/or property damage.
Loading ...
Loading ...
Loading ...