Loading ...
Loading ...
Loading ...
ASSEMBLY
Assembly requires two persons. Place all parts of the crosstrainer in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed. In addition to the included
allen wrenches, assembly requires a phillips screwdriver ___._, an adjustable wrench
and a rubber mallet C-ii-ii......LL_:_-t_ •
As you assemble the crosstrainer, use the drawings below to identify the small parts used in assembly. The
number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page
14. The second number refers to the quantity used in assembly. Note: Some small parts may have been pre-
assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.
M6 Zinc Nylon
Locknut (53)-4 M10 Zinc Nylon
Locknut (61)-5 M4 x 16mm M6 x 16mm Zinc M6 x 36mm Zinc Button
Screw (59)-4 Screw (57)-8 Bolt (52)-4
MIO x 54mm Zinc
Carriage Bolt (49)-2 MIO x 75mm Zinc Carriage Bolt (48)-2
MIO x 136mm Zinc Bolt (51)-1
1. Identify the Front Stabilizer (2). While another person
lifts the front of the Frame (1) slightly, attach the Front
Stabilizer to the Frame with two MIO x 75mm Zinc
Carriage Bolts (48) and two MIO Zinc Nylon Locknuts
(61).
1
48
61
4
Loading ...
Loading ...
Loading ...