Loading ...
Loading ...
Loading ...
4ENGLISH
Cordless inator safety warnings
1. When inating objects, connect the air chuck,
adapter, and valve tightly.Otherwise,theobject,
hose, air chuck, or adapter may be damaged and
youmaybeinjured.
2. Release air pressure slowly. When remov-
ing the hose after inating objects, hold the
object, hose, and air chuck rmly.Theobject,
air chuck, or adapter may bounce due to exhaust
airandcauseaninjury.
3. Do not inate object beyond the maximum
pressure of the object. Otherwise, the tool or
objectmaybedamagedandyoumaybeinjured.
4. Do not use the tool beyond the maximum out-
put pressure of the tool. Using the tool at output
pressure greater than the maximum output pres-
sureofthetoolmaybursttheobjectorthetool.
5. Inate the objects intended to be inated by
the manufacturer only, such as tire, sport ball,
or small oating tube.Inatingotherobjectsmay
damagethemandcauseaninjury.
6. When inating objects, check the pressure
gauge, status of the tool and object, and check
that there is no air leak. Otherwise, the tool or
objectmaybedamagedandcauseaninjury.
7. When carrying the tool, hold the handle of the
tool. Do not hold or pull the hose.Thetoolmay
bedamagedandcauseaninjury.
8. After inating objects, check the air pressure
using a reliable and calibrated measuring
equipment. Use the pressure gauge of the tool
only as a reference.
9. After using the tool for 5 minutes continuously,
stop using the tool for 5 minutes for cooling
down. Do not use the tool beyond the continu-
ous operating time allowed. Otherwise, the tool
maybedamagedandcauseaninjury.
10. Do not use the tool on sand or dusty surface.
Foreignobjectsmayentertheinsideofthetool
and cause a malfunction.
11. Do not point the outlet of the hose to yourself
or others.Objectsmaybeblownawayandcause
aninjury.
12. Do not point the outlet of the hose to dust or
similar.Thedustmaybescatteredandcausean
injury.
13. Do not inate large capacity objects. If you
inatealargecapacityobject,thetoolmay
become extremely hot and could burn your skin.
14. Do not touch the tool, hose, air chuck, or
adapter right after inating objects.Themetal
parts may become extremely hot and could burn
your skin.
15. Do not use the tool with wet hands.
16. When folding the clamp of air chuck, be care-
ful not to pinch your ngers between the air
chuck and clamp.
17. Make sure that the hose is not entangled.The
entangled hose may cause loss of balance and
causeaninjury.
18. Never leave the tool unattended when the hose
is attached to the object or during operation.
19. Do not use the tool as a breathing device.
20. Do not use the tool to spray chemicals. Your
lungs may be damaged by inhaling toxic fumes.
21. Operate the tool in an open area at least 50 cm
(20") away from any wall or object that could
restrict air ow to ventilation openings.
22. Do not disassemble the tool.
23.
Use only standard accessories provided by
Makita.Theuseofanyotheraccessoriesorattach-
mentsmightpresentariskofinjurytopersons.
24. This tool is for household use only.
Symbols
Thefollowingsshowthesymbolsusedfortool.
volts
direct current
Important safety instructions for
battery cartridge
1.
Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery char-
ger, (2) battery, and (3) product using battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them
out with clear water and seek medical atten-
tion right away. It may result in loss of your
eyesight.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with any con-
ductive material.
(2) Avoid storing battery cartridge in a con-
tainer with other metal objects such as
nails, coins, etc.
(3) Do not expose battery cartridge to water
or rain.
A battery short can cause a large current
ow, overheating, possible burns and even a
breakdown.
6. Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50 °C (122 °F).
7. Do not incinerate the battery cartridge even if
it is severely damaged or is completely worn
out. The battery cartridge can explode in a re.
8. Be careful not to drop or strike battery.
9. Do not use a damaged battery.
10.
The contained lithium-ion batteries are subject to
the Dangerous Goods Legislation requirements.
For commercial transports e.g. by third parties,
forwarding agents, special requirement on pack-
aging and labeling must be observed.
For preparation of the item being shipped, consult-
ing an expert for hazardous material is required.
Please also observe possibly more detailed
national regulations.
Loading ...
Loading ...
Loading ...