Loading ...
Loading ...
Loading ...
34
10) Remove the front panel. Move the control switch to the "ICE" position, then replace the
front panel in its correct position.
11) Open the water supply line shut-off valve to supply water to the reservoir.
12) After the gear motor starts, remove the front panel. Move the power switch to the "OFF"
position. Move the control switch to the "DRAIN" position, then move the power switch
back to the "ON" position. Replace the front panel in its correct position.
13) Allow the water system to drain for 5 minutes.
14) Remove the front panel. Move the control switch to the "ICE" position, then replace the
front panel in its correct position.
15) Allow the icemaker to run for about 30 minutes, then remove the front panel. Move the
power switch to the "OFF" position, then unplug the unit from the electrical outlet.
16) Pour warm water into the dispenser unit/ice storage bin and melt any remaining ice.
Clean the dispenser unit/ice storage bin liner using a neutral cleaner. Rinse thoroughly
after cleaning.
17) Plug in the icemaker. Make sure the control switch is in the "ICE" position, then move
the power switch to the "ON" position to start the automatic icemaking process.
Loading ...
Loading ...
Loading ...