Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com6
STEP 3
Hardware Needed:
IMPORTANT NOTE:
• The Gray Support Tube should have the longer end attached to the Caster Beam,
bending up and out.
• The Black Strut Tube should have the longer end attached to the Caster Beam,
bending up and out.
• If needed, loosen the Lock Nuts assembled in step 1.
• Thread the bolt in the following order: Bolt (H1) through Washer (H13), Gray
Support Tube (P4), Plastic Spacer (H9), Caster Beam (P2), Plastic Washer (H10),
Black Strut Tube (P5), Plastic Washer (H10), Triangle Support Plate (H18), Washer
(H13), securing with Lock Nut (H6).
• Repeat steps for all four sections.
• Ensure all nuts are securely tightened before moving onto the next step.
LONG END
SHORT END
H18
H1
H13
H6
H9
H10
M10 Lock nut 4.PCS
Triangle Support Plates 4.PCS
Bolt M10x110MM 4.PCS
M10 Washer 8.PCS
M10 Plastic Washer 8.PCS
M10 Plastic Spacer 4.PCS
P5
P4
P2
Strut Tube 4.PCS
Support Tube 4.PCS
Caster Beams 2.PCS
CAUTION:
DO NOT overtighten the nuts,
as this will apply too much pressure
to the spacers and may cause them
to crack.
Loading ...
Loading ...
Loading ...