Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com4
STEP 1
Hardware Needed:
• Before beginning, ensure you have cleared an area large enough for the table
to be assembled.
• Align Triangle Support Plate with Caster Beam to line up holes. Thread the bolt
in the following order: Bolt (H2) through a Washer (H13), the Caster Beam (P2),
a Stop Spool (H17), the Triangle Support Plate (H18), another Washer (H13),
and Lock Nut (H6).
• Hand tighten only. DO NOT tighten completely, as nuts/bolts will be adjusted
in a later step.
• NOTE: For easiest set up, try to attach both bolts at the same time on each end.
• Repeat steps for all four sections (x4).
P2
H2
H6
H13
H17
H18
M10 Washer 16.PCS
Caster Beams 2.PCS
Bolt M10x75MM 8.PCS
M10 Lock nut 8.PCS
Triangle Support Plates 4.PCS
Stop Spool 8.PCS
WARNING:
Clear area of small children
and pets
Loading ...
Loading ...
Loading ...