Loading ...
Loading ...
Loading ...
19
TROUBLESHOOTING
Problem Cause Solution
Motor fails to start
when switch trigger is
depressed
The battery is not inserted in
or connection is loose. Insert the battery into unit.
Defective cable Check cable. Repair or replace if required
Defective safety switch/plug Arrange for repair
Overheat protection activated
1. Working depth too large, set to a
shorter depth.
2. Tines blocked, remove the blockage.
3. Soil too hard, select correct work depth
and move forward and backward several
times while slowing down the operation
speed.
Wait until the motor cools down for about
15 minutes before further use.
Abnormal noises
Tine is jammed
Switch off . Wait till tines comes to a
complete stop.
Remove jammed objects.
Lubrication running out
Tiller/cultivator must be repaired. Call
our customer
service help line at 1-800-791-9458 for
assistance.
Bolts, nuts or other components
are loose.
Tighten all components. Arrange for
repair if noises
continue.
Abnormal vibrations Tines damaged or worn Replace damaged or worn tines.
Working depth too large Set to correct working depth.
Poor results Working depth too small Set to correct working depth.
Worn tines Replace damaged or worn tines
Loading ...
Loading ...
Loading ...